The NETWORK DATA COLLECTION MODULE is a small remote unit
that can gather large amounts of data and forward it to a central system. The
user can interrogate a wide variety of industrial equipment by monitoring a host
of analog and digital sensors. This information is then transferred via an RS232
or ETHERNET connection.
Numerous
modules can be used in a system to provide monitoring and reporting on a large
number of different units. Since each module has its own IP address, the only
practical limits on the system size is the network to which they are attached.
Also, since each module operates independently, there is no reduction in
data collection performance as the system grows.
- 16
ANALOG INPUTS
- EACH
INPUT ACCEPTS A 4 –20mA
SIGNAL
- 16
DIGITAL INPUTS
- RATED
TO OPERATE AT 24VDC
- 16
BIT A/D CONVERTERS
- 2
RS232 PORTS WITH DB-9 CONNECTORS
- DATA
COLLECTION RATE OF <450 MSEC TOTAL FOR ALL INPUTS
- ETHERNET
INTERFACE, IEEE 802.3, 10BaseT/100BaseTX, RJ-45
- CONNECTOR
- TCP/IP
PROTOCOL
- 24VDC
INPUT POWER
- SMALL
PACKAGE SIZE (11x5.9x2.5 inches)
- OPEN
BOARD CONSTRUCTION
- NO
SOFTWARE TO WRITE – ALL FUNCTIONS ARE BUILT-IN
- NO
OPERATING SYSTEM – DEDICATED CODE FOR GREATER RELIABILITY
AND SPEED
- FAST
STARTUP – OPERATIONAL IN 5 SECONDS AFTER POWER IS
APPLIED
- QUICK
DISCONNECT TERMINAL BLOCKS, GROUPED TO ALLOW
- INDIVIDUAL
SENSORS TO BE PLUGGED AND UNPLUGGED EASILY
- LED
INDICATORS
- PLATINUM
RTD, 100 OHM
|
MODEL |
INPUTS |
|
8220 |
16
Digital
16
Analog |
|
