PROCESS CONTROL PANELS

 


Description

The Series 7510 is a family of self contained microprocessor based Process Controllers. The units monitor temperature utilizing a Type K thermocouple sensor and control temperature with a rapid response three mode (PID) control scheme, with anti‑reset windup. Numerous status and alarm functions are incorporated to monitor various system parameters.

 

The unit is housed in a NEMA 12 enclosure.  It contains not only the temperature controller, but also the the necessary terminal blocks, transformers, safety and solid state relays, external heatsink and many other features that make up a complete system. 

An independent high limit circuit is also provided. The sensor is a second Type K thermocouple. This circuit shuts off the internal safety relay should an over-temperature condition occur. It is totally independent of the microprocessor section.

Back to Top

Features

  • USES TYPE K THERMOCOUPLE FOR PROCESS CONTROL

  • USES SECOND TYPE K THERMOCOUPLE FOR HIGH LIMIT

  • AUTOMATIC THERMOCOUPLE COLD JUNCTION COMPENSATION

  • HI LIMIT CIRCUITRY INDEPENDENT OF MICROPROCESSOR

  • ADVANCED RAPID RESPONSE 3 MODE CONTROL

  • BUILT IN SAFETY RELAY

  • BUILT IN SOLID STATE RELAY

  • BUILT IN CLASS 2 TRANSFORMER

  • EXTERNAL HEAT SINK

  • ON/OFF SWITCH

  • HEATER SNAP SWITCH INPUT

  • FLOW SWITCH INPUT

  • ACCESS CODE PARAMETER PROTECTION

  • EEPROM PARAMETER MEMORY

  • AUDIO ALARM/ANNUNCIATOR

  • ALL PARAMETERS SET IN SOFTWARE-NO POTS OR SWITCHES

  • NEMA 12 ENCLOSURE

  • TWO BRIGHT FOUR DIGIT LED DISPLAYS

  • SMOOTH FACE CONSTRUCTION

  • MULTIFUNCTION TIMER (OPTIONAL)

  • AUXILIARY RELAY OR SOLENOID (OPTIONAL)

  • RS232 COMMUNICATIONS (OPTIONAL)

  • ETHERNET COMMUNICATIONS (OPTIONAL)

  • OTHER SENSORS AVAILABLE (TYPE J T/C, RTD, ETC.)

Back to Top

Specifications

Temperature Range1 0 - 1999 Degrees F
TEMPERATURE RESOLUTION 1 Degree F

NOISE REJECTION

NMR - 60 db @ 60 HZ

CMR - 120 db @ 60 HZ

TIME RANGE (OPTIONAL)

0:00 - 99:59 Min:Sec

TIME RESOLUTION (OPTIONAL)

1 Sec

1 Min

MEASURING TIME

10 Conversions/Sec

DISPLAY

Four or Eight 0.56 inch High, Seven Segment, LCD Uniplaner Numerals.

Eight Discrete LEDs (Red, Green, Amber)

ANNUNCIATOR

Audio Tone, ~3200 HZ

SETUP MEMORY

EEPROM, All Parameters

MEMORY RETENTION

10 Years w/o Power

SENSOR2

Standard - Type K Thermocouple Cold Junction Compensation,

Up Scale Break Protection

CONTROL

PID with Anti-Reset Windup

ADJUSTMENT

Cycle Rate:  0 - 19 Sec

Proportional Band:

                        .1 - 199 Degree F

Reset (Integral):  .1 - 199 Sec

Rate (Derivative):  .1 - 199 Sec

Calibration Offset:  

                        + 99 Degrees F

OPERATING RANGE

0 - 50 Degrees C

STORAGE RANGE

-40 - 60 Degrees C

CONSTRUCTION

Enclosure - NEMA 12, 14 ga Steel, Powder Coated

Face - Lexan, Back Printed

SIZE

10 x 8 x 6 inches

10 x 10 x 6 inches

(H x W x D)

WEIGHT

< 18 lbs. (8.16 kg)

< 22 lbs. (9.98 kg)

CONNECTIONS

Power & Load -

         20 AMP Pressure Connector

                22 - 10 AWG

         40 AMP Pressure Connector

                22 - 8 AWG

Control - 

          6-32 Screws, 14 to 24 AWG

Communications - DB9 (Optional)

OUTPUT

Heater:  SSR, Optically isolated, Zero cross, 20 AMP or 40 AMP

1 Models also available in other ranges, configurations and scales.

2  Models also available with other temperature sensors (Type J T/C, RTD, etc.).

Back to Top

Available Models

MODEL NUMBER

LINE VOLTAGE

PHASE CURRENT MAX WATTAGE
7510A20 120/208/240 VAC 1 20 AMPS 2400/4100/4800
7510A40 120/208/240 VAC 1 40 AMPS 4800/8300/9600
7510B20 208/240 VAC 3 20 AMPS 7200/8300
7510B40 208/240 VAC 3 40 AMPS 14400/16600
7510C20 277 VAC 1 20 AMPS 5500
7510C40 277 VAC 1 40 AMPS 11000
7510D20 480 VAC 1 20 AMPS 9600
7510D40 480 VAC 1 40 AMPS 19200
7510E20 480 VAC 3 20 AMPS 16600
7510E40 480 VAC 3 40 AMPS 33200
Back to Top

Manuals and Drawings

Procon_Literature/7510_01.pdf

Procon_Manuals/Manual_Procon_7510_rev04.pdf
 
Back to Top

Related Products

 

Back to Top
 

JPC CONTROLS

3081 Elm Point Industrial Dr., St. Charles, MO  63301

Phone:  636-946-3300    Fax:  636-724-2492    Email:  sales@jpccontrols.com

www.jpccontrols.com

Copyright 2010 JPC Controls Incorporated

Contact: Webmaster